When you open up the
program you will see the text box's to enter the host, login, password,
and port #. You must first fill out the login request
form to receive the server login info that goes here. Here
is a sample of what needs to go in.
Before
you login you will need to change the settings on a few
things.
First
Set Retries to 240 Seconds.
1. click options at
the top and then choose general options. Another window will
open with a few tabs on it. Make sure you are on the general
tab. Now change the retry delay to at least 120 sec. this is
pretty standard with any server on etree.
Now
you need to disiable NOOP/Keep Alive.
Click
the events tab. You should now see 2 column of stuff. One heading
says "On
Transfer Completion" and the other "On Connect".
under the "On Transfer Completion" make sure you
check disconnect from site. If you don't most siteops will
ban you from returning. The reason is because if you are not
there when it finishes you will be idle, taking up a login
for someone else. You don't have to change the part under "On
Connect".
Now
you are ready to connect.
Simply click the little
handshake at the top left.
PASSIVE
MODE
If you have any
trouble logging in, try using passive mode. Click options at
the top and then choose general options. Now choose the firewall
tab and put a check in the box Enable FTP firewall/proxy and
make sure Passive is choosen.
Queue
up your files
When it connects you
will see all the files on the right side of the screen. When
you find a show you want to download, highlight it and click
the picture that is a folder with a down arrow on it. This
will put what ever you queue into the lower frame of the program.
Start
Transfering
Now when you have
what you want to download in the bottom click the GREEN GO
button to start your transfer. Make sure you know where the
files are going on your computer. This is shown on the left
side of the screen. The easiest thing to do is crate a directory
on a drive that has the most room. Each show is going to be
about 1gig.
